Click here

METER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here Click here
Tip:

  • Perform troubleshooting according to the following flow chart.

  • *: Use the intelligent tester.


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP


    • NEXT
  2. Click here

    CUSTOMER PROBLEM ANALYSIS


    • NEXT
  3. Click here

    CHECK CAN COMMUNICATION SYSTEM*


    1. Check for DTC output (Click here).

      Result
      Result Proceed to
      No CAN DTC is output A
      CAN DTC is output B

      • B
      • GO TO CAN COMMUNICATION SYSTEM (See pageClick here)
      • A
  4. Click here

    CHECK AVC-LAN CIRCUIT


    1. Check for DTC output (Click here).

      Result
      Result Proceed to
      No DTC is output A
      DTC is output B

      • B
      • GO TO NAVIGATION SYSTEM (See pageClick here)
      • A
  5. Click here

    PROBLEM SYMPTOM CONFIRMATION


    • NEXT
  6. Click here

    SYMPTOM SIMULATION


    • NEXT
  7. Click here

    PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table (Click here).


      • NEXT
  8. Click here

    CIRCUIT INSPECTION


    • NEXT
  9. Click here

    REPAIR OR REPLACE


    • NEXT
  10. Click here

    CONFIRMATION TEST


    • NEXT
    • END