SECURITY HORN ASSEMBLY (except Built-in Battery type) INSTALLATION


  1. INSTALL SECURITY HORN ASSEMBLY


    1. A019JMR

      Connect the connector.

    2. A019NOH

      Install the security horn assembly with the bolt.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

  2. INSTALL AIR CLEANER ASSEMBLY (for 1AR-FE)


    1. A019KVSE01
      Text in Illustration
      *a A side view
      *b Front of the vehicle
      *c 11 to 14 mm (0.433 to 0.551 in.)

      Install the air cleaner hose with the hose clamp.

      Note

      Install the air cleaner hose clamp so that the orientation is as shown in the illustration.

    2. A019M7QE02
      Text in Illustration
      *a Tab
      *b Hole

      Insert the tab of the air cleaner assembly to the hole of the vehicle body as shown in the illustration.

    3. Install the air cleaner assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    4. A019LTQE02
      Text in Illustration
      *a Light blue paint mark

      Connect the vacuum hose to the 2 clamps of the air cleaner hose.

      Note

      Align the light blue paint mark of the vacuum hose with the clamp of the air cleaner hose.

    5. Connect the vacuum hose.

    6. Connect the ventilation hose to the cylinder head cover.

    7. Connect the vacuum switching valve connector and install the vacuum hose to the 2 clamps.

    8. Connect the No. 2 fuel vapor feed hose to the vacuum switching valve and clamp of the air cleaner hose.

    9. Connect the mass air flow meter connector and install the wire harness clamp to the air cleaner assembly.

    10. Connect the vacuum switching valve connector and install the wire harness clamp to the air cleaner assembly.

  3. INSTALL BATTERY (for 1AR-FE)


    1. Install the battery and battery tray.

    2. A019LTJ

      Install the battery clamp with the bolt and nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the positive (+) cable to the positive (+) battery terminal.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  4. INSTALL NO. 1 AIR CLEANER INLET (for 1AR-FE)


    1. Install the No. 1 air cleaner inlet with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  5. INSTALL NO. 2 AIR CLEANER INLET (for 1AR-FE)


    1. Install the No. 2 air cleaner inlet with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  6. INSTALL AIR CLEANER ASSEMBLY (for 2GR-FE)


    1. A019M7QE01
      Text in Illustration
      *1 Tab
      *2 Hole

      Insert the tab of the air cleaner assembly to the hole of the vehicle body as shown in the illustration.

    2. A019JQO

      Install the air cleaner assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    3. A019L8LE01
      Text in Illustration
      *1 Ventilation Hose
      *2 Fuel Vapor Feed Hose

      Connect the air cleaner hose to the throttle body with the hose clamp.

    4. Connect the ventilation hose and the fuel vapor feed hose.

    5. A019LU3

      Connect the 2 vacuum hoses.

    6. A019KSB

      Connect the 2 wire harness clamps and vacuum switching valve connector.

    7. A019LPG

      Connect the vacuum hose to the intake air surge tank assembly.

    8. Install the hose to the hose clamp.

    9. A019K7G

      Connect the mass air flow meter connector and wire harness clamp.

  7. INSTALL BATTERY (for 2GR-FE)


    1. Install the battery and battery tray.

    2. A019LTJ

      Install the battery clamp with the bolt and nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the positive (+) cable to the positive (+) battery terminal.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  8. INSTALL NO. 1 AIR CLEANER INLET (for 2GR-FE)


    1. A019ND6

      Install the No. 1 air cleaner inlet with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the vacuum hose clamp to the No. 1 air cleaner inlet.

  9. INSTALL NO. 2 AIR CLEANER INLET (for 2GR-FE)


    1. A019O60

      Install the No. 2 air cleaner inlet with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 2 vacuum hose clamps to the No. 2 air cleaner inlet.

  10. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 6 clips.

  11. INSTALL ENGINE ROOM SIDE COVER


    1. Engage the guide.

    2. Install the engine room side cover with the 4 clips.

  12. INSTALL ENGINE ROOM SIDE COVER LH


    1. Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.