ENGINE HOOD COURTESY SWITCH REMOVAL


  1. REMOVE FRONT BUMPER ASSEMBLY


  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)


    1. A019LF9

      Disconnect the connector.

    2. Remove the 3 bolts and the millimeter wave radar sensor assembly.

  3. REMOVE LOW PITCHED HORN ASSEMBLY (for LHD)


    1. A019OJ0

      Disconnect the connector.

    2. Remove the bolt and low pitched horn assembly.

  4. REMOVE HIGH PITCHED HORN ASSEMBLY (for RHD)


    1. A019LXM

      Disconnect the connector.

    2. Remove the bolt and high pitched horn assembly.

  5. REMOVE SMOG VENTILATION SENSOR (for RHD)


    1. A019LDV

      Disconnect the connector.

    2. Remove the bolt

    3. Disengage the guide and remove the smog ventilation sensor.

  6. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A019P5I

      Remove the 3 screws.

    2. Disengage the clamp and remove the hood lock control cable cover.

  7. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. A019PJ1

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A019OVS

      Remove the 2 bolts and hood lock nut.

    3. A019K84

      Disconnect the connector.

    4. Disconnect the hood lock control cable and remove the hood lock assembly.