DOOR CONTROL RECEIVER INSTALLATION


  1. INSTALL DOOR CONTROL RECEIVER


    1. Install the door control receiver with the bolt.

    2. A019MDZ

      Connect the connector.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Connect the connector.

    2. Engage the 2 clips and the 5 claws.

    3. Install the deck trim side panel assembly RH with the 2 bolts and 5 clips.

      A019MNS

  3. INSTALL HEIGHT CONTROL SWITCH (w/ Air Suspension)


    1. Connect the connector.

    2. A019KUS

      Engage the 2 claws to install the absorber control switch to the deck trim side panel assembly RH.

  4. INSTALL RECLINING REMOTE CONTROL BEZEL RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  6. INSTALL ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  7. INSTALL REAR SEAT SIDE COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  8. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  9. INSTALL REAR FLOOR FINISH SIDE PLATE RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  10. INSTALL REAR FLOOR FINISH PLATE


    1. A019OZP

      Engage the 6 clips, 2 claws and 2 guides, and install the rear floor finish plate.

  11. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire)


    1. A019KZM

      Install the deck side trim box RH with the 2 clips.

  12. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire)


    1. A019LD6

      Install the deck side trim box RH with the 3 clips.

  13. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire)


    1. A019JUH

      Engage the 2 guides and install the No. 3 rear floor board.

  14. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire)


    1. A019K2O

      Engage the 2 guides and install the No. 3 rear floor board.

  15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover assembly.

  16. INSTALL SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire)


    1. Install the spare wheel cover assembly.

  17. INSTALL DECK BOARD SUB-ASSEMBLY


    1. for Compact Spare Tire:


      1. A019N72

        Install the deck board sub-assembly with the 2 bolts.

    2. for Full Size Spare Tire:


      1. A019JPE

        Install the deck board sub-assembly with the 2 bolts.

    3. A019OYI

      Engage the 3 fasteners as shown in the illustration.

  18. INSTALL REAR SEAT ASSEMBLY RH


    1. A019JSJ

      Temporarily install the 2 bolts on the front side of the seat.

    2. A019PE0

      Temporarily install the 3 bolts on the rear side of the seat.

    3. w/ Rear Seat Side Airbag:


      1. A019JTC

        Connect the connector.

    4. Install the rear seat assembly RH with the 5 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  19. CONNECT REAR SEAT LOCK CABLE ASSEMBLY RH


    1. When replacing the rear seat assembly RH or rear seat reclining control cable with a new one:


      1. A019OJU

        Connect the rear seat assembly RH or rear seat reclining control cable as shown in the illustration.

    2. When replacing the rear seat lock cable assembly RH with a new one:


      1. Engage the joint piece with the cable of the rear seat lock cable assembly RH.

      2. Connect the rear seat lock cable assembly RH and connector case as shown in the illustration.

        A019M5R

      3. Push the lock pin of the connector case as shown in the illustration to connect the rear seat lock cable assembly RH.

        A019NTP

    3. When reusing the rear seat assembly RH, rear seat reclining control cable and rear seat lock cable assembly RH:


      1. Connect the rear seat lock cable assembly RH as shown in the illustration.

        A019JQ4

      2. Connect the rear seat lock cable assembly RH as shown in the illustration.

        A019NBDE01
        Text in Illustration
        *1 Seat Track Adjusting *2 Protective Tape
      3. A019PDP

        Install the rear seat reclining control cable to the cover as shown in the illustration.

      4. A019LTO

        Connect the rear No. 1 seat lock cable assembly as shown in the illustration.

    4. Return the seatback to the upright position.

    5. Press the adjuster's lock piece to lock it as shown in the illustration.

      A019K6OE01
      Text in Illustration
      *1 Adjusters Spring *2 Lock Piece

      Note

      When pressing the lock piece, make sure the adjusters spring is not compressed.

    6. A019NRZ

      Engage the guide.

    7. Connect the No. 1 fold seat stopper band assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }
    8. A019KLS

      Connect the rear seatback board carpet assembly RH with the 3 clips.

    9. A019LW5

      Connect the rear seatback board sub-assembly with the 2 clips.

  20. INSPECT REAR SEAT SLIDE ADJUSTER LOCK


    1. Check that the left and right adjusters lock simultaneously when sliding the seat.

    2. If the left and right adjusters do not lock simultaneously, adjust by loosening the bolts securing the seat.

  21. INSTALL REAR SEAT TRACK BRACKET COVER RH


    1. A019NBE

      Engage the 8 claws and install the 2 seat track bracket cover RH.

  22. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY


    1. A019KOM

      Install the rear seat headrest assembly as shown in the illustration.

  23. INSTALL REAR SEAT HEADREST ASSEMBLY RH


    1. A019OYM

      Install the rear seat headrest assembly as shown in the illustration.

  24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  25. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

    Click here

  26. INSPECT SRS WARNING LIGHT

    Click here