INTEGRATION RELAY INSTALLATION


  1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY


    1. A019O5C

      Connect the 3 connectors.

    2. A019N1V

      Engage the 2 claws to install the engine room junction block assembly as shown in the illustration.

  2. INSTALL NO. 1 RELAY BLOCK COVER


    1. A019KEV

      Engage the 4 claws to install the lower No. 1 relay block cover.

    2. A019LFU

      Engage the 3 claws to install the upper No. 1 relay block cover.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.