POWER MANAGEMENT CONTROL ECU (for LHD) REMOVAL


  1. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


    1. A019LCF

      Disconnect the 2 connectors.

    2. A019NWNE01

      Disengage the 2 claws as shown in the illustration and disconnect the 2 connectors (A).

    3. Disconnect the 4 connectors (B).

    4. A019KOC

      Remove the 2 nuts.

    5. A019LWE

      Disengage the claw as shown in the illustration and disconnect the connector.

    6. A019P66

      Disengage the 2 claws and release the connector lock as shown in the illustration.

    7. A019KX6

      Disengage the claw as shown in the illustration and disconnect the connector and remove the instrument panel junction block assembly.

  3. REMOVE POWER MANAGEMENT CONTROL ECU


    1. A019JVU

      Remove the 2 nuts and power management control ECU.