Tech Tips
*: Use the intelligent tester.
VEHICLE BROUGHT TO WORKSHOP
| NEXT |
|
CUSTOMER PROBLEM ANALYSIS
| NEXT |
|
CONNECT INTELLIGENT TESTER TO DLC3*
Tech Tips
If the display indicates a communication fault in the tester, inspect the DLC3. When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.
| NEXT |
|
CHECK DTC*
| NEXT |
|
CLEAR DTC*
| NEXT |
|
CONDUCT VISUAL INSPECTION
| NEXT |
|
CONFIRM PROBLEM SYMPTOMS
Tech Tips
Refer to Problem Symptoms Table Click here.
If the engine does not start, first perform the Check DTC and Conduct Basic Inspection steps that follow.
| Result | Proceed to |
|---|---|
| Malfunction does not occur | A |
| Malfunction occurs | B |
| B |
|
GO TO STEP 9 |
| A |
|
SIMULATE SYMPTOMS
Tech Tips
Refer to Problem Symptoms Table Click here.
| NEXT |
|
CHECK FOR DTC*
Tech Tips
Refer to DTC Check / Clear Click here.
| Result | Proceed to |
|---|---|
| Trouble code | A |
| No code | B |
| B |
|
GO TO STEP 12 |
| A |
|
REFER TO DTC CHART
Tech Tips
Refer to DTC chart Click here.
| NEXT |
|
CONDUCT BASIC INSPECTION
| Result | Proceed to |
|---|---|
| Malfunctioning parts not confirmed | A |
| Malfunctioning parts confirmed | B |
| B |
|
GO TO STEP 17 |
| A |
|
REFER TO PROBLEM SYMPTOMS TABLE
Tech Tips
Refer to Problem Symptoms Table Click here.
| Result | Proceed to |
|---|---|
| Malfunctioning circuit confirmed | A |
| Malfunctioning parts confirmed | B |
| B |
|
GO TO STEP 17 |
| A |
|
CHECK POWER SOURCE CIRCUIT
Tech Tips
Refer to Terminal of ECU Click here.
| NEXT |
|
CONDUCT CIRCUIT INSPECTION
| Result | Proceed to |
|---|---|
| Malfunction not confirmed | A |
| Malfunction confirmed | B |
| B |
|
GO TO STEP 18 |
| A |
|
CHECK FOR INTERMITTENT PROBLEMS
| NEXT |
|
CONDUCT PARTS INSPECTION
| NEXT |
|
IDENTIFY PROBLEM
| NEXT |
|
ADJUST AND/OR REPAIR
| NEXT |
|
CONDUCT CONFIRMATION TEST
| NEXT |
|
| END |