Click here

GENERATOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL GENERATOR ASSEMBLY


    1. A019LIQ

      Install the generator with the 2 bolts.

      52 N*m 530 kgf*cm 38 ft.*lbf
    2. A019JY8

      Install the wire harness clamp bracket with the bolt.

      8.4 N*m 86 kgf*cm 74 in.*lbf

    3. Connect the generator wire with the nut.

      9.8 N*m 100 kgf*cm 87 in.*lbf

    4. Install the terminal cap.

    5. Connect the generator connector.

    6. Connect the wire harness clamp.

  2. Click here

    INSTALL V-RIBBED BELT


    1. Install the belt (Click here).

  3. Click here

    INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 6 clips.

  4. Click here

    INSTALL ENGINE ROOM SIDE COVER


    1. Engage the guide.

    2. Install the engine room side cover with the 4 clips.

  5. Click here

    INSTALL ENGINE ROOM SIDE COVER LH


    1. Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).