ULTRASONIC SENSOR (for Front Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A019JW6E01
      Text in Illustration
      *A RH Side
      *B LH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  2. INSTALL NO. 1 ULTRASONIC SENSOR


    1. A019L22E01
      Text in Illustration
      *A RH Side
      *B LH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. for Front Sensor:


      1. A019KD3E01
        Text in Illustration
        *A RH Side
        *B LH Side

        Engage the 4 claws to install the ultrasonic sensor clip.

      2. A019KKIE01
        Text in Illustration
        *A RH Side
        *B LH Side

        Engage the clamp.

      3. Connect the connector.

    3. for Corner Sensor:


      1. A019O6OE01
        Text in Illustration
        *A RH Side
        *B LH Side

        Connect the connector.

  3. INSTALL FRONT BUMPER ASSEMBLY (for Standard)

    Click here

  4. INSTALL FRONT BUMPER ASSEMBLY (for Sport Package)

    Click here