GENERATOR INSTALLATION


  1. INSTALL GENERATOR ASSEMBLY


    1. A019NEV

      Install the wire harness clamp stay with the bolt.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }
    2. A019O7M

      Connect the wire harness clamp.

    3. Install the generator assembly to the cylinder block with the generator bracket, bolt and nut.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }
    4. A019KOS

      Install the 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }
    5. A019MQ0

      Connect the generator connector to the generator assembly.

    6. Install the generator wire with the nut.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

    7. Install the terminal cap.

    8. Connect the wire harness clamps.

    9. Connect the magnetic clutch connector to the compressor and magnetic clutch.

  2. INSTALL V-RIBBED BELT

    Tech Tips

    Click here.

  3. INSTALL RADIATOR ASSEMBLY WITH FAN SHROUD AND FAN MOTOR

    Tech Tips

    Click here.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A019LVN

      Fit the 4 retainers and install the V-bank cover sub-assembly.