MAYDAY SWITCH REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. w/ Holder:


      1. Open the holder.

    2. w/o Holder:


      1. A019NBAE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the cover.

    3. A019PKAE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the 2 caps.

    4. A019MUU

      Remove the 2 screws.

    5. Using a moulding remover, disengage the 2 clips and 2 guides.

    6. Disconnect each connector and remove the map light assembly.

  2. REMOVE THEFT WARNING RADAR SENSOR (w/ Theft Deterrent System)


    1. A019KTD

      Disconnect the connector.

    2. Disengage the clamp.

    3. A019KPS

      Remove the screw and gear.

    4. A019JOY

      Remove the cover as shown in the illustration.

    5. A019JN0

      Remove the 6 screws and theft warning radar sensor.

  3. REMOVE TELEPHONE SWITCH ASSEMBLY


    1. A019PHN

      Remove the 2 screws and telephone switch assembly.