MULTI-DISPLAY REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. A019KU9E01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover B
      *3 Moulding Remover D

      Apply protective tape to the areas shown in the illustration.

    2. Insert moulding remover B and D as shown in the illustration.

    3. Pull down moulding remover B in direction (1). With moulding remover B being pulled down, pull down moulding remover D in direction (2) to disengage the clip and guide.

    4. A019KMNE01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover B
      *3 Moulding Remover D

      Apply protective tape to the areas shown in the illustration.

    5. Insert moulding remover B and D as shown in the illustration.

    6. Pull down moulding remover B in direction (1). With moulding remover B being pulled down, pull down moulding remover D in direction (2) to disengage the clip.

    7. A019OTC

      Disengage the 2 clips and remove the center instrument cluster finish panel as shown in the illustration.

  2. REMOVE MULTI-DISPLAY ASSEMBLY


    1. A019OPI

      Remove the 3 bolts.

    2. Disengage the 2 claws.

    3. Disconnect each connector and remove the multi-display assembly