Click here

REAR SEAT ENTERTAINMENT ECU INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY

  2. Click here

    INSTALL NO. 3 MULTI-DISPLAY CONTROLLER BRACKET


    1. Install the No. 3 multi-display controller bracket with the 2 bolts.

  3. Click here

    INSTALL NO. 2 MULTI-DISPLAY CONTROLLER BRACKET


    1. Install the No. 2 multi-display controller bracket with the 2 bolts.

  4. Click here

    INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY WITH BRACKET


    1. Install the multi-display controller assembly with bracket with the 3 nuts.

  5. Click here

    INSTALL REAR SEAT ENTERTAINMENT ECU ASSEMBLY


    1. w/o G-BOOK System:


      1. Engage the guide.

      2. Install the rear seat entertainment ECU assembly with the 3 bolts.

      3. Connect the 3 connectors.

    2. w/ G-BOOK System:


      1. Engage the guide.

      2. Install the rear seat entertainment ECU assembly with the 3 bolts.

      3. Connect the 7 connectors.

    3. A019KWY

      Engage the claw and 3 clamps to install the floor carpet to the original position.

    4. A019MUP

      Engage the claw and 3 clamps to install the floor carpet to the original position.

  6. Click here

    INSTALL CONSOLE BOX (for RHD)


    1. A019MQ4E01

      Engage the 3 guides as shown in the illustration.

      Table 1. Text in Illustration
      *1 Clamp
      *2 Guide

    2. Engage the 2 clamps.

    3. Install the 2 clips.

    4. Install the console box with the 5 screws <D>.

  7. Click here

    INSTALL CONSOLE BOX (for LHD)


    1. A019MGBE01

      Engage the 3 guides as shown in the illustration.

      Table 2. Text in Illustration
      *1 Clamp
      *2 Guide

    2. Engage the 2 clamps.

    3. Install the 3 clips.

    4. Install the console box with the 5 screws <D>.

  8. Click here

    INSTALL FRONT CONSOLE BOX COVER


    1. A019M0N

      Connect the connector.

    2. Engage the 5 guides and 2 clips, and install the front console box cover.

  9. Click here

    INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    1. A019KVZ

      Engage the 7 clips to install the lower instrument panel finish panel as shown in the illustration.

  10. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL


    1. A019MX7

      Engage the 2 guides, claw and 2 clips to install the instrument panel finish panel as shown in the illustration.

  11. Click here

    INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the 8 clips and 2 guides.

    3. Install the lower instrument panel finish panel sub-assembly with the 2 screws <D>.

    4. A019NKJ

      Engage the 2 claws to close the cover as shown in the illustration.

  12. Click here

    INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A019N7C

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  13. Click here

    INSTALL INSTRUMENT PANEL GARNISH LH


    1. A019K28

      Engage the 6 clips to install the instrument panel garnish LH.

  14. Click here

    INSTALL REAR CONSOLE BOX ASSEMBLY

    (Click here)

  15. Click here

    INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A019L27

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  16. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH


    1. w/ Illumination:


      1. Connect the connector.

    2. A019LA0

      Engage the 4 clips, guide and 7 claws, and install the front door scuff plate LH.

  17. Click here

    INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  18. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.