REAR DOOR SPEAKER REMOVAL

REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

1. 

   Using a moulding remover, disengage the 3 claws and remove the rear door inside handle bezel plug as shown in the illustration.

REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

1. 

   Using a moulding remover, disengage the 2 clips and 3 claws.

2. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

REMOVE REAR DOOR ARMREST COVER

1. 

   Remove the rear door armrest cover.

REMOVE COURTESY LIGHT ASSEMBLY

1. 

   Using a screwdriver wrapped with protective tape, disengage the claw.

   Table 1. Text in Illustration

   *A	for LH Side
   *B	for RH Side
   *1	Protective Tape

2. Disconnect the connector and remove the courtesy light assembly.

REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

1. 

   Remove the 3 screws.

2. Using a clip remover, disengage the 7 clips and 2 rear door trim board retainers.

   Table 2. Text in Illustration

   *1	Rear Door Trim Board Retainer

3. 

   Pull out the rear door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

4. Raise the rear door trim board sub-assembly to disengage the 4 claws and remove the rear door trim board sub-assembly together with the rear door inner glass weatherstrip.

5. for 12 Speakers or 15 Speakers:

   
   

   1. Disconnect the connector.

6. 

   Disconnect the rear door lock remote control cable assembly and rear door inside locking cable assembly as shown in the illustration.

7. Remove the 2 rear door trim board retainers (green) from the rear door trim board sub-assembly.

REMOVE REAR DOOR INNER GLASS WEATHERSTRIP

1. 

   Using a moulding remover, disengage the 4 claws and remove the rear door inner glass weatherstrip from the rear door trim board sub-assembly as shown in the illustration.