NAVIGATION SYSTEM, Diagnostic DTC:B1585

DTC Code DTC Name
B1585 USB Device Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in a connected device.

DTC No. DTC Detection Condition Trouble Area
B1585

USB Device Malfunction


  • Non mass-storage class or incompatible protocol USB device

  • USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT)

  • "iPod" malfunction

  • "iPod" with unsupported firmware

  • Unsupported "iPod" model


  • USB device or "iPod"

  • Multi-media module receiver assembly

INSPECTION PROCEDURE

Note


    w/ G-BOOK System:

  • When replacing the multi-media module receiver assembly or telematics transceiver, perform vehicle contract setting (w/ Telematics Transceiver) Click here.

  • When replacing the multi-media module receiver assembly, perform vehicle contract setting (w/o Telematics Transceiver) Click here.

PROCEDURE


  1. REPLACE USB DEVICE OR “iPod”


    1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

    2. Turn the engine switch off.

      Tech Tips

      When this DTC has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.

    3. Turn the engine switch to on (ACC).

    4. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

      Tech Tips


      • If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.

      • Refer to System Description for compatible formats and versions Click here.


    NEXT
  2. CHECK DTC


    1. Clear the DTCs Click here.

    2. Recheck for DTCs and check that no DTCs are output.

      Tech Tips

      If DTCs are detected frequently, replace the multi-media module receiver assembly.

      OK
      No DTCs are output.

    NG
    OK