MULTIPLEX TILT AND TELESCOPIC ECU (for LHD) REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  2. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

    Tech Tips

    Refer to the instructions for Removal of the driver side knee airbag assembly Click here.

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A019O9N

      Disconnect the 2 connectors from the multiplex tilt and telescopic ECU.

    2. A019L5O

      Remove the bolt and the multiplex tilt and telescopic ECU.