STEERING COLUMN ASSEMBLY DISASSEMBLY

Note

When using a vise, do not overtighten it.


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. A019P6NE01
      Text in Illustration
      *1 Screw Extractor

      Secure the steering column assembly in a vise.

    2. Using a center punch, mark the center of the 2 tapered-head bolts.

    3. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in each tapered-head bolt.

    4. Using a screw extractor, remove each tapered-head bolt and steering lock actuator assembly from the steering column assembly.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU (for LHD)


    1. A019KSA

      Disconnect the connector from the multiplex tilt and telescopic ECU.

    2. A019NI5

      Remove the bolt and the multiplex tilt and telescopic ECU.

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU (for RHD)


    1. A019JO6

      Disconnect the connector from the multiplex tilt and telescopic ECU.

    2. A019N6F

      Remove the bolt and multiplex tilt and telescopic ECU.