PARKING BRAKE ASSEMBLY DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE REAR WHEEL

  3. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY


    1. A019ODV

      Remove the 2 bolts, and separate the rear disc brake caliper assembly.

      Note

      Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

  4. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG


    1. Remove the parking brake shoe adjusting hole plug.

  5. REMOVE REAR DISC


    1. A019JMSE01
      Text in Illustration
      *1 Matchmark

      Put matchmarks on the rear disc and the axle hub.

    2. A019NIL

      Release the parking brake and remove the rear disc.

      Tech Tips

      If the disc can not be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.

  6. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A019N5H

      Remove the 2 No. 1 parking brake shoe return tension springs.

  7. SEPARATE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A019O3A

      Remove the No. 1 parking brake shoe hold down spring cup and parking brake shoe hold down spring to separate the No. 1 parking brake shoe assembly from the backing plate.

  8. REMOVE PARKING BRAKE SHOE LEVER STRUT


    1. A019K69

      Remove the parking brake shoe lever strut and parking brake shoe strut compression spring.

  9. SEPARATE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    1. A019NOO

      Remove the No. 1 parking brake shoe hold down spring cup and parking brake shoe hold down spring to separate the No. 2 parking brake shoe assembly from the backing plate.

  10. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A019NQ1

      Remove the parking brake shoe adjusting screw set.

  11. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A019MD4

      Separate the No. 2 parking brake shoe return tension spring to remove the No. 1 parking brake shoe assembly.

  12. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A019O5T

      Remove the No. 2 parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.

  13. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER


    1. A019LM2

      Using needle-nose pliers, separate the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

      Note

      Be careful not to damage the No. 3 parking brake cable assembly.

  14. REMOVE PARKING BRAKE SHOE LEVER


    1. A019OI2

      Remove the C-washer, shim and parking brake shoe lever from the No. 2 parking brake shoe assembly as shown in the illustration.

  15. REMOVE PARKING BRAKE SHOE GUIDE PLATE SET BOLT


    1. A019KGS

      Remove the parking brake shoe guide plate set bolt and parking brake shoe guide plate.

  16. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN


    1. A019LC2

      Remove the parking brake shoe hold down spring pin (for front side).

    2. A019NZT

      Remove the parking brake shoe hold down spring pin (for rear side).