REAR BRAKE FLEXIBLE HOSE REMOVAL

Note

If both the left and right hoses are disconnected at the same time, be sure to place identification marks indicating the position on each side.

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  3. REMOVE REAR WHEEL

  4. REMOVE REAR FLEXIBLE HOSE


    1. A019OP6

      Remove the union bolt and gasket, and separate the rear flexible hose.

    2. A019JMC

      Remove the 2 bolts and separate the rear flexible hose from the flexible hose bracket.

    3. A019M65

      Using a union nut wrench, disconnect the brake line from the rear flexible hose.

      Note


      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake line.

    4. Remove the clip and rear flexible hose.

  5. REMOVE FLEXIBLE HOSE BRACKET


    1. A019PA3

      Remove the bolt and flexible hose bracket from the rear upper control arm assembly.