BRAKE MASTER CYLINDER (for LHD) DISASSEMBLY


  1. REMOVE BRAKE MASTER CYLINDER TO WAY TUBE


    1. Mount the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A019N79

      Using a union nut wrench, remove the brake master cylinder to way tube from the No. 2 brake tube way and brake master cylinder body.

  2. REMOVE NO. 2 BRAKE TUBE WAY


    1. Remove the No. 2 brake tube way from the brake master cylinder body.

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. A019OIM

      Mount the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. Using a pin punch and a hammer, tap out the straight pin, and remove the brake master cylinder reservoir sub-assembly.

  4. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.