Click here

REAR SPEED SENSOR (for AWD) REMOVAL

Click here
Click here Click here
Tip:

If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.

Click here
  1. Click here

    REMOVE PRECAUTION (w/ Navigation System for HDD)

    Note:

    After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Table 1. Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.
  2. Click here

    PRECAUTION (w/ Air Suspension)

    Note:

    Be sure to read Precaution thoroughly before servicing (Click here).

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE REAR WHEEL

  5. Click here

    REMOVE REAR SPEED SENSOR LH


    1. A019KDFE01

      Disconnect the rear speed sensor connector.

      Table 2. Text in Illustration
      *1 No. 4 Bracket
    2. A019K9TE01

      Remove the nut and No. 4 bracket from the rear member assembly.

      Table 3. Text in Illustration
      *1 No. 4 Bracket
    3. A019LWVE01

      Remove the 2 bolts, No. 3 bracket and No. 2 bracket from the upper control arm assembly.

      Table 4. Text in Illustration
      *1 No. 2 Bracket
      *2 No. 3 Bracket
    4. A019LIWE01

      Remove the 2 bolts, No. 1 bracket and rear speed sensor from the rear trailing arm assembly and the rear axle carrier sub-assembly.

      Table 5. Text in Illustration
      *1 No. 1 Bracket
      Note:

      • Prevent foreign matter from attaching to the rear speed sensor tip.

      • Clean the speed sensor installation hole and the contact surfaces every time the rear speed sensor is removed.

  6. Click here

    REMOVE REAR SPEED SENSOR RH


    1. A019P7KE01

      Disconnect the rear speed sensor connector.

    2. A019K18E01

      Remove the nut and No. 4 bracket from the rear member assembly.

      Table 6. Text in Illustration
      *1 No. 4 Bracket
    3. A019L9PE01

      Remove the 2 bolts, No. 3 bracket and No. 2 bracket from the upper control arm.

      Table 7. Text in Illustration
      *1 No. 2 Bracket
      *2 No. 3 Bracket
    4. A019O34E01

      Remove the 2 bolts, No. 1 bracket and rear speed sensor from the rear trailing arm assembly and the rear axle carrier sub-assembly.

      Table 8. Text in Illustration
      *1 No. 1 Bracket
      Note:

      • Prevent foreign matter from attaching to the rear speed sensor tip.

      • Clean the speed sensor installation hole and the contact surfaces every time the rear speed sensor is removed.