SKID CONTROL BUZZER REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable from the negative (-) battery terminal, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

    Tech Tips

    Refer to the procedure up to Remove Driver Side Knee Airbag Assembly Click here.

  4. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for LHD)

    Tech Tips

    Refer to the procedure up to Remove Instrument Panel Junction Block Assembly Click here.

  5. REMOVE SKID CONTROL BUZZER ASSEMBLY (for LHD)


    1. A019OF6

      Remove the skid control buzzer clamp.

    2. A019OC4E01

      Disconnect the skid control buzzer connector.

  6. REMOVE SKID CONTROL BUZZER ASSEMBLY (for RHD)


    1. A019NX7E01

      Remove the skid control buzzer clamp.

    2. Disconnect the skid control buzzer connector.