TIRE PRESSURE WARNING RECEIVER INSTALLATION


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. A019K5W

      Connect the connector to the tire pressure warning ECU and receiver.

    2. A019OWS

      Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

    3. Install the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REGISTER TRANSMITTER ID

    Click here

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  6. PERFORM INITIALIZATION

    Click here