TIRE PRESSURE WARNING RECEIVER REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER


    1. A019OWS

      Remove the bolt.

    2. Disengage the 2 hooks to remove the tire pressure warning ECU and receiver.

    3. A019K5W

      Disconnect the connector from the tire pressure warning ECU and receiver.