WASHER LEVEL WARNING SWITCH REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT WHEEL RH

  3. REMOVE FRONT FENDER LINER RH


    1. A019MS3E01

      Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

    2. A019MAO

      Using a 4 mm hexagon wrench, remove the 4 hexagon screws.

    3. A019NHQE01
      Text in Illustration
      *1 Grommet

      Remove the 7 clips and 6 screws.

    4. Remove the 3 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  4. DRAIN WINDSHIELD WASHER FLUID


    1. A019KKN

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE WASHER LEVEL WARNING SWITCH ASSEMBLY


    1. A019MS6

      Disconnect the connector.

    2. Remove the washer level warning switch assembly.