WASHER MOTOR (for Rear Side) INSTALLATION


  1. INSTALL REAR WASHER MOTOR ASSEMBLY


    1. A019JU1

      Install the rear washer motor and pump assembly.

    2. Connect the connector.

    3. Connect the washer hose.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. A019NHQE01
      Text in Illustration
      *1 Grommet

      Install 3 new grommets and 6 screws.

    2. Install the 7 clips.

    3. A019MAO

      Using a 4 mm hexagon wrench, install the front fender liner RH with the 4 hexagon screws.

    4. A019PEFE01
      Text in Illustration
      *1 Correct
      *2 Incorrect

      Install the 2 pin hold clips.

      Note

      Insert the pin hold with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

  4. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }