REAR WIPER MOTOR REMOVAL


  1. REMOVE UPPER BACK WINDOW PANEL TRIM


    1. A019LJ0E01
      Text in Illustration
      *1 2-piece Type Clip

      Disengage the 7 clips and 6 claws, and remove the upper back window panel trim.

      Tech Tips

      If any clips remain on the back door panel after the upper back window panel trim is removed, remove the clips and install them to the upper back window panel trim.

  2. REMOVE REAR SPOILER SUB-ASSEMBLY


    1. Disconnect each connector.

    2. A019LCD

      Remove the 2 hole plugs.

    3. Remove the 5 nuts.

    4. A019MCM

      Disengage the clip and 2 pins to remove the rear spoiler sub-assembly.

    5. Remove the clip and 2 pins.

  3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A019LXI

      Remove the nut and the rear wiper arm and blade assembly.

  4. REMOVE REAR WIPER MOTOR GROMMET


    1. A019O2Q

      Remove the rear wiper motor grommet.

  5. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY


    1. A019P7E

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the 3 bolts and the rear wiper motor and bracket assembly.