Click here

REAR UPPER ARM INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH


    1. A019KIV

      Temporarily install the rear upper control arm assembly LH to the rear suspension member sub-assembly with the bolt and nut.

      Note:

      • Insert the bolt with the threaded end facing the rear side of the vehicle.

      • Since the stopper nut is used, tighten the bolt.

    2. A019LG0E01

      Set the rear upper control arm assembly LH in the tightening position as shown in the illustration.

      Standard Length (A)
      24.3 mm (0.957 in.)
    3. A019KIV

      Fully tighten the bolt in the tightening position.

      120 N*m 1224 kgf*cm 89 ft.*lbf
      Note:

      Since the stopper nut is used, tighten the bolt.

  2. Click here

    INSTALL REAR UPPER CONTROL ARM ASSEMBLY RH

    Tip:

    Perform the same procedure as the LH side.

  3. Click here

    INSTALL REAR SPEED SENSOR WIRE LH (for 2WD)


    1. A019KTH

      Install the rear speed sensor wire LH to the rear upper control arm assembly LH with the 2 bolts.

      8.0 N*m 82 kgf*cm 71 in.*lbf
      Note:

      Do not twist the rear speed sensor wire LH when installing it.

  4. Click here

    INSTALL REAR SPEED SENSOR LH (for AWD)

    Tip:

    Perform the same procedure as the rear speed sensor wire LH.

  5. Click here

    INSTALL REAR SPEED SENSOR WIRE RH (for 2WD)


    1. A019P41

      Install the rear speed sensor wire RH to the rear upper control arm assembly RH with the 2 bolts.

      8.0 N*m 82 kgf*cm 71 in.*lbf
      Note:

      Do not twist the rear speed sensor wire RH when installing it.

  6. Click here

    INSTALL REAR SPEED SENSOR RH (for AWD)

    Tip:

    Perform the same procedure as the rear speed sensor wire RH.

  7. Click here

    INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ HID Headlight System)


    1. A019O7F

      Install the rear height control sensor sub-assembly RH to the rear upper control arm assembly RH with the bolt.

      5.4 N*m 55 kgf*cm 48 in.*lbf
  8. Click here

    INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ Air Suspension)


    1. A019NEO

      Install the rear height control sensor sub-assembly LH to the rear upper control arm assembly LH with the bolt.

      5.4 N*m 55 kgf*cm 48 in.*lbf
  9. Click here

    INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

    for 2WD: (Click here)

    for AWD: (Click here)