REAR UPPER ARM REMOVAL


  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    for 2WD: Click here

    for AWD: Click here

  2. SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ HID Headlight System)


    1. A019O7F

      Remove the bolt and separate the rear height control sensor sub-assembly RH from the rear upper control arm assembly RH.

  3. SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ Air Suspension)


    1. A019NEO

      Remove the bolt and separate the rear height control sensor sub-assembly LH from the rear upper control arm assembly LH.

  4. SEPARATE REAR SPEED SENSOR WIRE LH (for 2WD)


    1. A019KTH

      Remove the 2 bolts and separate the rear speed sensor wire LH from the rear upper control arm assembly LH.

  5. SEPARATE REAR SPEED SENSOR LH (for AWD)

    Tech Tips

    Perform the same procedure as the rear speed sensor wire LH.

  6. SEPARATE REAR SPEED SENSOR WIRE RH (for 2WD)


    1. A019P41

      Remove the 2 bolts and separate the rear speed sensor wire RH from the rear upper control arm assembly RH.

  7. SEPARATE REAR SPEED SENSOR RH (for AWD)

    Tech Tips

    Perform the same procedure as the rear speed sensor wire RH.

  8. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH


    1. A019KIV

      Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.

      Note

      Since the stopper nut is used, loosen the bolt.

  9. REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.