FRONT SUSPENSION MEMBER REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for the LHD vehicle.


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    for 2GR-FE: Click here

    for 1AR-FE: Click here

  2. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A019KPI

      Remove the 2 bolts and the front No. 1 stabilizer bracket LH from the front frame assembly.

  3. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY


    1. Remove the front stabilizer bar with front stabilizer link assembly.

  5. REMOVE STEERING LINK ASSEMBLY


    1. A019N4D

      Remove the 2 bolts, 2 nuts and steering link assembly.

      Note

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

  6. REMOVE FRONT FRAME ASSEMBLY

    for 2GR-FE: Click here

    for 1AR-FE: Click here

  7. REMOVE FRONT ENGINE MOUNTING INSULATOR

    for 2GR-FE: Click here

    for 1AR-FE: Click here

  8. REMOVE ENGINE MOUNTING INSULATOR LH

    for 2GR-FE: Click here

    for 1AR-FE: Click here

  9. REMOVE ENGINE MOUNTING INSULATOR RH

    for 2GR-FE: Click here

    for 1AR-FE: Click here

  10. REMOVE REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE)


    1. A019PBN

      Remove the 2 hole plugs.

    2. Remove the 2 nuts and rear engine mounting insulator assembly.

      Note

      Do not remove the rear engine mounting insulator assembly through bolts. Doing so makes it difficult to install the rear engine mounting insulator assembly.

      Tech Tips

      Perform this procedure only when replacement of the engine mounting insulator assembly is necessary.

  11. REMOVE FRONT LOWER SUSPENSION ARM LH


    1. A019PJ4

      Remove the 3 bolts, nut and front lower suspension arm from the front frame assembly.

    2. Remove the front lower arm bushing stopper from the front lower suspension arm.

  12. REMOVE FRONT LOWER SUSPENSION ARM RH

    Tech Tips

    Perform the same procedure as the LH side.

  13. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for 2WD)


    1. A019NKRE04

      Remove the 2 bolts and front suspension member dynamic damper.

  14. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for AWD)


    1. A019KW6

      Remove the 2 bolts and front suspension member dynamic damper.

  15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER

  16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER

  17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION


    1. A019NSEE03
      Text in Illustration
      *1 Front Suspension Member Body Mounting Front Cushion

      Install SST as shown in the illustration.

      SST
      09830-10010   ( 09830-01010, 09830-01040, 09830-01050 )
      09950-40011   ( 09951-04020, 09952-04010, 09954-04010, 09955-04011 )
    2. A019P6KE03
      Text in Illustration
      *1 Turn
      *2 Hold

      Using SST, remove the front suspension member body mounting front cushion.

      Note


      • Make sure that the claws of SST are securely hung onto the mounting cushion.

      • Tighten SST slowly and evenly.

      • Be careful as the mounting cushion may fly out.

      • The mounting cushion cannot be reused.

  18. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH


    1. A019NSEE03
      Text in Illustration
      *1 Front Suspension Member Body Mounting Rear Cushion

      Install SST as shown in the illustration.

      SST
      09830-10010   ( 09830-01010, 09830-01040, 09830-01050 )
      09950-40011   ( 09951-04020, 09952-04010, 09954-04010, 09955-04011 )
    2. A019M9VE03
      Text in Illustration
      *1 Turn
      *2 Hold

      Using SST, remove the front suspension member body mounting rear cushion LH.

      Note


      • Make sure that the claws of SST are securely hung onto the mounting cushion.

      • Tighten SST slowly and evenly.

      • Be careful as the mounting cushion may fly out.

      • The mounting cushion cannot be reused.

  19. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH

    Tech Tips

    Perform the same procedure as the LH side.