FRONT STABILIZER BAR (for 2GR-FE) REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    Tech Tips

    Refer to the procedure up to Remove Engine Assembly with Transaxle Click here.

  2. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH


    1. A019M97

      Remove the nut and separate the front stabilizer link assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  3. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  4. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A019KPI

      Remove the 2 bolts and the front No. 1 stabilizer bracket LH from the front frame assembly.

  5. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  6. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the front frame assembly.

  7. REMOVE FRONT NO. 2 STABILIZER BRACKET LH


    1. A019N5L

      Remove the front No. 2 stabilizer bracket LH from the front stabilizer bar bushing.

  8. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  9. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING


    1. Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.