FRONT STABILIZER BAR (for 1AR-FE) INSTALLATION


  1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING


    1. A019KZEE08
      Text in Illustration
      *1 Cutout
      *2 Front of the Vehicle
      *3 Inside of the Vehicle

      Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

      Note

      When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.

  2. INSTALL FRONT NO. 2 STABILIZER BRACKET LH


    1. A019N5L

      Install the front No. 2 stabilizer bracket LH to the front No. 1 stabilizer bar bushing.

  3. INSTALL FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  4. INSTALL FRONT STABILIZER BAR


    1. A019LHHE02

      Install the front stabilizer bar by inserting it from the left side of the vehicle.

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. A019PH1

      Install the front stabilizer link assembly LH with the nut.

      Torque:
      74 N*m  { 755 kgf*cm, 55 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  7. INSTALL STEERING LINK ASSEMBLY

    Click here