HEIGHT CONTROL SWITCH (for Driver Seat) INSTALLATION


  1. INSTALL HEIGHT CONTROL SWITCH


    1. A019LRB

      Engage the 2 claws to install the height control switch to the lower instrument panel finish panel sub-assembly.

  2. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A019N7C

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  3. INSTALL INSTRUMENT PANEL GARNISH LH


    1. A019K28

      Engage the 6 clips to install the instrument panel garnish LH.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Some systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  6. INSPECT SUSPENSION CONTROL SYSTEM


    1. Inspect the suspension control system Click here.