HEIGHT CONTROL SWITCH (for Luggage Compartment) INSTALLATION


  1. INSTALL HEIGHT CONTROL SWITCH


    1. Connect the connector.

    2. A019KUS

      Engage the 2 claws to install the absorber control switch to the deck trim side panel assembly RH.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Some systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  4. INSPECT SUSPENSION CONTROL SYSTEM


    1. Inspect the suspension control system Click here.