HEIGHT CONTROL SWITCH (for Luggage Compartment) INSPECTION


  1. INSPECT HEIGHT CONTROL SWITCH


    1. A019N8YE02
      Text in Illustration
      *1 Component without harness connected (Height control switch)

      Measure the resistance according to the values in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (LSW) - 8 (IGH) Height control switch while up side pressed 10 kΩ or higher
      Height control switch while down side pressed Below 1 Ω
      Height control switch not pressed 10 kΩ or higher
      2 (HSW) - 8 (IGH) Height control switch while up side pressed Below 1 Ω
      Height control switch while down side pressed 10 kΩ or higher
      Height control switch while pressing "UP" button 10 kΩ or higher

      If the value is not as specified replace the height control switch.