ABSORBER CONTROL SWITCH INSTALLATION


  1. INSTALL ABSORBER CONTROL SWITCH


    1. A019P0O

      Engage the 2 claws to install the absorber control switch to the No. 1 instrument panel under cover sub-assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Engage each clamp.

    2. Connect each connector.

    3. A019OY6

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Some systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  5. INSPECT SUSPENSION CONTROL SYSTEM


    1. Inspect the suspension control system Click here.