HEIGHT CONTROL COMPRESSOR INSTALLATION


  1. INSTALL HEIGHT CONTROL COMPRESSOR ASSEMBLY


    1. Install the 3 bushings to the height control compressor assembly.

    2. A019JTE

      Install the bracket to the height control compressor assembly with the 3 bolts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

  2. INSTALL HEIGHT CONTROL VALVE HARNESS ASSEMBLY


    1. Push the connector into the housing until a clicking sound is heard.

    2. Engage the 3 clamps.

    3. A019OL6

      Connect the height control valve harness assembly.

  3. INSTALL NO. 2 HEIGHT CONTROL TUBE


    1. Coat a new O-ring with MP grease No. 2.

    2. Install a new O-ring to the No. 2 height control tube.

    3. A019JXB

      Connect the No. 2 height control tube to the height control compressor assembly with the holder.

      Tech Tips

      For the connecting procedure of the tube (type 3), refer to Precaution of Suspension Control System Click here.

    4. Install the No. 2 height control tube to the 3 clamps.

  4. INSTALL NO. 1 HEIGHT CONTROL HOSE


    1. A019NEH

      Install the No. 1 height control hose to the height control compressor assembly with the clip.

  5. INSTALL HEIGHT CONTROL FILTER


    1. A019PHO

      Install the height control filter to the bracket with the 2 bolts.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

    2. Connect the 2 height control hoses to the height control filter with the 2 clips.

  6. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET


    1. A019OGY

      Install the height control compressor bracket to the body with the 2 bolts and nut.

      Torque:
      19 N*m  { 195 kgf*cm, 14 ft.*lbf }

    2. Engage the wire harness clamp to the bracket.

  7. INSTALL HEIGHT CONTROL COMPRESSOR WITH BRACKET


    1. A019MLL

      Install the height control compressor with bracket with the 4 bolts.

      Torque:
      19 N*m  { 195 kgf*cm, 14 ft.*lbf }
    2. A019KAT

      Engage the wire harness clamp to the bracket.

    3. A019KR7

      Connect the 2 connectors.

    4. Coat a new O-ring with MP grease No. 2.

    5. Install the O-ring to the No. 2 height control tube.

    6. A019MEB

      Connect the No. 2 height control tube to the height control way with the holder.

      Tech Tips

      For the connecting procedure of the tube (type 3), refer to Precaution of Suspension Control System Click here.

  8. INSTALL CAP GROMMET


    1. A019N15

      Install a new cap grommet to the No. 1 rear bumper reinforcement.

    2. Install the No. 2 height control hose to the cap grommet with the clamp.

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Some systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  11. INSPECT FOR AIR LEAK


    1. Inspect for air leaks Click here.

  12. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR


    1. A019NFT

      Install the No. 1 luggage compartment side cover protector with the 2 clips.

    2. Install the 2 bolts and 2 screws.