PROPELLER SHAFT ASSEMBLY DISASSEMBLY


  1. REMOVE PROPELLER SHAFT


    1. A019NSKE02
      Text in Illustration
      *1 Matchmark

      Place matchmarks on both flanges.

    2. Remove the 4 nuts, 4 bolts and 4 washers.

  2. REMOVE INTERMEDIATE SHAFT


    1. A019M8FE02
      Text in Illustration
      *1 Matchmark

      Place matchmarks on the rear flange and rear propeller shaft.

      Note

      Do not make matchmarks with a punch.

    2. Using a hexagon wrench (6 mm), remove the 6 bolts, 2 washers and intermediate shaft from the rear propeller shaft.

  3. REMOVE NO. 2 CENTER SUPPORT BEARING ASSEMBLY (for Front Side)


    1. A019MSJE02
      Text in Illustration
      *1 Matchmark

      Place matchmarks on the front flange and intermediate shaft.

    2. A019OKLE01

      Using SST and a hammer, unstake the staked part of the nut.

      SST
      09930-00010
    3. A019LN8E04
      Text in Illustration
      *1 Turn
      *2 Hold

      Using SST to hold the front flange, remove the nut and washer.

      SST
      09330-00021
    4. A019NDQE01
      Text in Illustration
      *1 Turn
      *2 Hold

      Using SST, remove the front flange.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )

      Note


      • Be careful not to damage the universal joint flange.

      • Do not overtighten the vise.

      • Apply grease to the threads and end of the SST center bolt (09953-04030) before use.

    5. Remove the No. 2 center support bearing assembly and washer.

  4. REMOVE NO. 2 CENTER SUPPORT BEARING ASSEMBLY (for Rear Side)


    1. A019JPYE02
      Text in Illustration
      *1 Matchmark

      Place matchmarks on the rear flange and intermediate shaft.

    2. A019M8ZE01

      Using SST and a hammer, unstake the staked part of the nut.

      SST
      09930-00010
    3. A019O5OE04
      Text in Illustration
      *1 Turn
      *2 Hold

      Using SST to hold the front flange, remove the nut and washer.

      SST
      09330-00021
    4. A019MBNE01
      Text in Illustration
      *1 Turn
      *2 Hold

      Using SST, remove the rear flange.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )

      Note


      • Be careful not to damage the universal joint flange.

      • Do not overtighten the vise.

      • Apply grease to the threads and end of the SST center bolt (09953-04030) before use.

    5. Remove the No. 2 center support bearing assembly and washer.