REAR DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT REAR DRIVE SHAFT ASSEMBLY


    1. A019LWN

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. A019JWJE04

      Check whether the drive shaft dimension (A) is within the following specification.

      Dimension (A)
      750.6 mm (2.46 ft.)