TRANSFER CASE FRONT OIL SEAL REPLACEMENT


  1. REMOVE TRANSFER ASSEMBLY

    Click here.

  2. REMOVE TRANSFER CASE FRONT OIL SEAL


    1. A019L0ME01

      Using SST, remove the transfer case front oil seal from the transfer case.

      SST
      09308-00010

      Note

      Do not damage the oil seal contact surface on the case.

  3. INSTALL TRANSFER CASE FRONT OIL SEAL


    1. A019NMIE01

      Using SST, drive in a new transfer case front oil seal into the transfer case until it reaches the position shown in the illustration.

      SST
      09608-10010
      09950-70010   ( 09951-07150 )
      Drive in depth
      9.5 to 10.5 mm (0.374 to 0.413 in.)

      Note

      Do not tilt the oil seal during installation.

    2. Apply a small amount of MP grease to the lip of the oil seal.

  4. INSTALL TRANSFER ASSEMBLY

    Click here.