Click here

OIL PUMP REASSEMBLY

Click here
Click here Click here
  1. Click here

    INSTALL FRONT OIL PUMP OIL SEAL


    1. A019MTAE01

      Using SST and a hammer, install a new oil seal to the front oil pump body.

      09350-32014 09351-32140
      Oil seal driven in depth
      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

    2. Coat the lip of the oil seal with MP grease.

  2. Click here

    INSTALL FRONT OIL PUMP BODY O-RING


    1. A019NTW

      Coat a new O-ring with ATF and install it to the front oil pump body.

      Note:

      Ensure that the O-ring is not twisted.

  3. Click here

    INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A019PLY

      Coat the front oil pump driven gear with ATF and install it to the front oil pump body with the marked side up.

  4. Click here

    INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A019K2J

      Coat the front oil pump drive gear with ATF, and install it to the front oil pump body with the marked side up.

  5. Click here

    INSTALL STATOR SHAFT ASSEMBLY


    1. A019O9EE01

      Align each knock pin of the stator shaft with the holes in the front oil pump body and install the stator shaft to the front oil pump body.

    2. Using a "TORX" socket (T30), install the 16 bolts.

      9.3 N*m 95 kgf*cm 82 in.*lbf

      -

      Bolt Length

      Bolt A

      		 14 mm (0.551 in.)

      Bolt B

      		 26 mm (1.02 in.)
  6. Click here

    INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. A019OOP

      Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.

      Note:

      Be careful not to damage the oil seal lip.