SHIFT PADDLE SWITCH INSTALLATION


  1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY


    1. Connect the 2 No. 1 switch wire connectors to the 2 transmission shift switch assemblies.

      Note

      Make sure to only connect the connectors to each corresponding color.

    2. Install the 2 transmission shift switch assemblies with No. 1 switch wire to the steering wheel assembly with 2 new screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Attach the 5 guides to the steering wheel assembly.

    4. Connect the clamp and connector.

  2. INSTALL LOWER NO. 1 STEERING WHEEL BOSS COVER


    1. Install the 2 lower No. 1 steering wheel boss covers to the steering wheel assembly with 2 new screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

  3. INSTALL STEERING WHEEL ASSEMBLY

    Click here