DYNAMIC RADAR CRUISE CONTROL SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Powertrain / Radar Cruise / DTC.

    5. Check the details of the DTC(s) Click here.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Powertrain / Radar Cruise / DTC.

    5. Clear the DTCs.