STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. A019LZI

      Install the starter with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    2. A019K4AE01

      Connect the starter connector.

    3. Install the terminal nut and cover the nut with the cap.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  2. INSTALL AIR CLEANER BRACKET


    1. A019PFR

      Install the air cleaner bracket with the 2 bolts.

      Torque:
      13 N*m  { 132 kgf*cm, 10 ft.*lbf }

    2. Connect the engine wire clamp.

  3. INSTALL AIR CLEANER ASSEMBLY


    1. A019M7QE01
      Text in Illustration
      *1 Tab
      *2 Hole

      Insert the tab of the air cleaner assembly to the hole of the vehicle body as shown in the illustration.

    2. A019JQO

      Install the air cleaner assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    3. A019L8LE01
      Text in Illustration
      *1 Ventilation Hose
      *2 Fuel Vapor Feed Hose

      Connect the air cleaner hose to the throttle body with the hose clamp.

    4. Connect the ventilation hose and the fuel vapor feed hose.

    5. A019LU3

      Connect the 2 vacuum hoses.

    6. A019KSB

      Connect the 2 wire harness clamps and vacuum switching valve connector.

    7. A019LPG

      Connect the vacuum hose to the intake air surge tank assembly.

    8. Install the hose to the hose clamp.

    9. A019K7G

      Connect the mass air flow meter connector and wire harness clamp.

  4. INSTALL BATTERY


    1. Install the battery and battery tray.

    2. A019LTJ

      Install the battery clamp with the bolt and nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the positive (+) cable to the positive (+) battery terminal.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  5. INSTALL NO. 1 AIR CLEANER INLET


    1. A019ND6

      Install the No. 1 air cleaner inlet with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the vacuum hose clamp to the No. 1 air cleaner inlet.

  6. INSTALL NO. 2 AIR CLEANER INLET


    1. A019O60

      Install the No. 2 air cleaner inlet with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 2 vacuum hose clamps to the No. 2 air cleaner inlet.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. A019OCLE01

      Install the outer cowl top panel sub-assembly with the 4 bolts, 4 nuts*1 and 2 nuts*2.

      Torque:
      Nut*1
      85 N*m  { 867 kgf*cm, 63 ft.*lbf }
      Nut*2
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A019O7N

      Engage the grommet and clamp to install the wire harness.

    3. Connect the connector (w/ Windshield Deicer).

  9. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. A019OF3E01

      Install the outer cowl top panel sub-assembly with the 4 bolts, 4 nuts*1 and 2 nuts*2.

      Torque:
      Nut*1
      85 N*m  { 867 kgf*cm, 63 ft.*lbf }
      Nut*2
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A019N0P

      Engage the grommet and clamp to install the wire harness.

    3. Connect the connector (w/ Windshield Deicer).

  10. INSTALL FRONT SHOCK ABSORBER CAP (w/ Air Suspension)


    1. A019N7O

      Install the front shock absorber cap with the 3 nuts.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

  11. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Install the windshield wiper motor and link assembly Click here.

  12. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A019LVN

      Fit the 4 retainers and install the V-bank cover sub-assembly.