STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. A019LZI

      Install the starter with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    2. A019K4AE01

      Connect the starter connector.

    3. Install the starter wire with the nut and cover the nut with the cap.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  2. INSTALL AIR CLEANER BRACKET


    1. A019PFR

      Install the air cleaner bracket with the 2 bolts.

      Torque:
      13 N*m  { 132 kgf*cm, 10 ft.*lbf }

    2. Connect the engine wire clamp.

  3. INSTALL AIR CLEANER ASSEMBLY


    1. A019KVSE01
      Text in Illustration
      *a A side view
      *b Front of the vehicle
      *c 11 to 14 mm (0.433 to 0.551 in.)

      Install the air cleaner hose with the hose clamp.

      Note

      Install the air cleaner hose clamp so that the orientation is as shown in the illustration.

    2. A019M7QE02
      Text in Illustration
      *a Tab
      *b Hole

      Insert the tab of the air cleaner assembly to the hole of the vehicle body as shown in the illustration.

    3. Install the air cleaner assembly with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    4. A019LTQE02
      Text in Illustration
      *a Light blue paint mark

      Connect the vacuum hose to the 2 clamps of the air cleaner hose.

      Note

      Align the light blue paint mark of the vacuum hose with the clamp of the air cleaner hose.

    5. Connect the vacuum hose.

    6. Connect the ventilation hose to the cylinder head cover.

    7. Connect the vacuum switching valve connector and install the vacuum hose to the 2 clamps.

    8. Connect the No. 2 fuel vapor feed hose to the vacuum switching valve and clamp of the air cleaner hose.

    9. Connect the mass air flow meter connector and install the wire harness clamp to the air cleaner assembly.

    10. Connect the vacuum switching valve connector and install the wire harness clamp to the air cleaner assembly.

  4. INSTALL BATTERY


    1. Install the battery and battery tray.

    2. A019LTJ

      Install the battery clamp with the bolt and nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the positive (+) cable to the positive (+) battery terminal.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  5. INSTALL NO. 1 AIR CLEANER INLET


    1. A019LTK

      Install the No. 1 air cleaner inlet with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  6. INSTALL NO. 2 AIR CLEANER INLET


    1. A019ODB

      Install the No. 2 air cleaner inlet with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. A019OCLE01

      Install the outer cowl top panel sub-assembly with the 4 bolts, 4 nuts*1 and 2 nuts*2.

      Torque:
      Nut*1
      85 N*m  { 867 kgf*cm, 63 ft.*lbf }
      Nut*2
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A019O7N

      Engage the grommet and clamp to install the wire harness.

    3. Connect the connector (w/ Windshield Deicer).

  9. INSTALL HOSE BRACKET (for LHD)


    1. A019P7C

      Install the hose bracket to the outer cowl top panel sub-assembly with the 2 nuts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. A019OF3E01

      Install the outer cowl top panel sub-assembly with the 4 bolts, 4 nuts*1 and 2 nuts*2.

      Torque:
      Nut*1
      85 N*m  { 867 kgf*cm, 63 ft.*lbf }
      Nut*2
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A019N0P

      Engage the grommet and clamp to install the wire harness.

    3. Connect the connector (w/ Windshield Deicer).

  11. INSTALL WINDSHIELD WIPER MOTOR AND LINK


    1. Install the windshield wiper motor and link Click here.

  12. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A019KNK

      Fit the 3 retainers and install the No. 1 engine cover sub-assembly.