ENGINE OIL COOLER REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    CAUTION:

    Be sure to read Precaution thoroughly before service Click here.

  2. DRAIN ENGINE COOLANT


    1. Loosen the radiator drain cock plug and drain the coolant.

      Note

      Do not remove the radiator cap, cylinder block drain cock plugs and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the radiator cap from the radiator assembly.

    3. Loosen the 2 cylinder block drain cock plugs.

      A019LCUE01
      Text in Illustration
      *1 Air Drain Cock Plug *2 Radiator Cap
      *3 Cylinder Block Drain Cock Plug *4 Radiator Drain Cock Plug

  3. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and drain the oil into a container.

    3. Clean the oil pan drain plug.

    4. Install the oil pan drain plug with a new gasket.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  4. REMOVE EXHAUST MANIFOLD ASSEMBLY LH

    Tech Tips

    Remove Exhaust Manifold Assembly LH Click here.

  5. REMOVE ENGINE OIL COOLER


    1. A019KN7

      Remove the bolt, 2 clamps and 4 clips, and than remove the 2 water by-pass hoses.

    2. A019KI8

      Remove the oil cooler union bolt, oil cooler and O-ring.