CRUISE CONTROL SYSTEM FAIL-SAFE CHART

Tech Tips

If the following conditions are detected while the cruise control is operating, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.

A019M9PE01
Text in Illustration
*1 Multi-information Display
*2 Master Warning Light
*3 Cruise Main Indicator Light
Vehicle Condition Auto Cancel Condition Re-operation Condition

  • Cruise main indicator light goes off

  • Master warning light comes on

  • "CHECK CRUISE CONTROL SYSTEM" is displayed

  • Warning sound is heard

  • There is open or short in stop light switch circuit

  • There is problem with vehicle speed signal

 Turn cruise control main switch off

  • Cruise main indicator light goes off

  • Master warning light comes on

  • "CHECK CRUISE CONTROL SYSTEM" is displayed

  • Warning sound is heard

  • There is problem with input circuit of stop light switch

  • There is problem with cancel circuit

  • Turn engine switch off

  • Turn cruise control main switch off
Cruise main indicator light remains on

Under the following conditions, the stored vehicle speed is maintained:


  • Vehicle speed is lower than low speed limit (approx. 40 km/h (25 mph)) while driving with cruise control on

  • VSC system is operated

 Push cruise control main switch to + RES

  • Vehicle speed is lower than stored speed by approx. 16 km/h (10 mph) or more

 Push cruise control main switch to - SET
Cruise indicator light goes off

  • There is problem with throttle position sensor and motor

 Turn cruise control main switch off then on again