ENGINE OIL COOLER REMOVAL


  1. REMOVE EXHAUST MANIFOLD

    Click here

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and drain the engine oil into a container.

    3. Clean and install a new gasket and the oil pan drain plug.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. DRAIN ENGINE COOLANT


    1. Loosen the radiator drain cock and drain the coolant.

      CAUTION:

      Do not remove the radiator cap and radiator drain cock while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Loosen the air drain valve.

    3. Remove the radiator cap from the radiator assembly.

      A019K3KE01
      Text in Illustration
      *1 Air Drain valve *2 Radiator Cap Sub-assembly
      *3 Radiator Drain Cock - -

  4. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. A019LVP

      Remove the engine oil level dipstick.

    2. Remove the bolt and engine oil level dipstick guide.

    3. Remove the O-ring from the engine oil level dipstick guide.

  5. REMOVE OIL COOLER ASSEMBLY


    1. A019KCCE03
      Text in Illustration
      *1 Union Bolt
      *2 Seal Washer

      Remove the nut, union bolt, seal washer and oil cooler.

    2. Remove the 3 gaskets from the oil cooler.