EXHAUST MANIFOLD REMOVAL


  1. REMOVE AIR FUEL RATIO SENSOR

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE FRONT FLOOR COVER LH


    1. A019OFYE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the clip (A).

    2. Disconnect the 2 clips (B).

    3. Remove the 2 screws, 4 bolts and front floor cover LH.

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A019LYJ

      Disconnect the 2 wire harness clamps and connector.

    2. A019NDW

      Remove the 4 bolts, 2 compression springs and front exhaust pipe assembly.

    3. Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.

  5. REMOVE MANIFOLD STAY


    1. A019LAJ

      Remove the bolt, nut and manifold stay.

  6. REMOVE NO. 2 MANIFOLD STAY


    1. A019LP0

      Remove the bolt, nut and No. 2 manifold stay.

  7. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A019KKB

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator.

  8. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A019N1J

      Remove the 5 nuts and exhaust manifold converter sub-assembly.

    2. A019MTC

      Remove the exhaust manifold to head gasket.

  9. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A019NLN

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.

  10. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A019KFZ

      Remove the 4 bolts and No. 1 manifold converter insulator.