PURGE VALVE REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. SEPARATE HOSE BRACKET (for LHD)


    1. A019P7C

      Remove the 2 nuts and separate the hose bracket from the outer cowl top panel sub-assembly.

  3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. A019O7N

      Disconnect the connector (w/ Windshield Deicer).

    2. Disengage the grommet and clamp, and separate the wire harness.

    3. A019OCL

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. A019N0P

      Disconnect the connector (w/ Windshield Deicer).

    2. Disengage the grommet and clamp, and separate the wire harness.

    3. A019OF3

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

  5. REMOVE NO. 2 VACUUM SWITCHING VALVE ASSEMBLY


    1. A019PHF

      Disconnect the connector and 2 fuel vapor feed hoses.

    2. Remove the No. 2 vacuum switching valve assembly.